Collection
Solid Wood Flooring
One piece of oak, through its full thickness.
What it is
Solid wood flooring is made from boards cut out of a single piece of hardwood, in our case European oak, through their full thickness. There is no plywood core and no thin veneer on top: what you see on the surface is the same wood all the way down.
Why solid wood
A solid floor can be sanded and renewed many times over its life, so it is not replaced but refreshed. It brings natural warmth and quiet to a room, regulates indoor humidity, and keeps its value for decades. Every board is different, because every tree is.
Natural oil finish
Our boards are finished with plant-based natural oil. The oil soaks into the wood instead of forming a plastic film on top, so the floor keeps the true look and feel of the grain. Everyday marks can be repaired spot by spot, without sanding the whole room.
Surfaces and grades
Choose a flat surface, a brushed surface that lifts the soft grain for a tactile, matte look, or a saw-cut surface for a rustic, hand-worked feel. Rustic grade shows lively knots and character; AB grade is calmer, with a clean and even appearance.
- Species
- European oak
- Finish
- Natural oil
- Surface
- Flat · Brushed · Saw
- Grades
- Rustic · AB
Nextwood oiled oak
13 Colours
Wood is a natural material: tone and grain vary from board to board. Ask for a sample before you decide.
Laying patterns
Formats & Sizes
Plank
Long boards in mixed lengths, for quiet and open spaces.
- 16 × 90 mm · 250 – 1000 mm
- 18 × 120 mm · 250 – 1000 mm
- 20 × 150 mm · 400 – 1600 mm
Herringbone
Classic blocks laid at right angles.
- 16 × 90 · 18 × 120 mm
- Blocks 500 · 600 · 700 mm
Chevron 45°
Blocks with 45° ends meeting in a point.
- 16 × 90 · 18 × 120 mm
- 45° ends
The product
How a board is built
- Oiled oak surfacePlant-based natural oil, matte natural feel.
- Micro-bevelSoftly eased edges for an even surface.
- Tongue & groovePrecision profile on all sides.
- 100 % solid oakOne piece through its thickness: 16 · 18 · 20 mm.
Specifications
Technical Data
| Format | Thickness × Width | Length | Surface | Grade |
|---|---|---|---|---|
| Plank · mixed length | 16 × 90 mm | 250 – 1000 mm | Flat · Brushed | Rustic · AB |
| Plank · mixed length | 18 × 120 mm | 250 – 1000 mm | Flat · Brushed | Rustic · AB |
| Plank · mixed length | 20 × 150 mm | 400 – 1600 mm | On request | On request |
| Herringbone | 16 × 90 · 18 × 120 mm | 500 · 600 · 700 mm | Flat · Brushed | Rustic · AB |
| Chevron 45° | 16 × 90 · 18 × 120 mm | On request | Flat · Brushed | Rustic · AB |
| Saw surface plank | 16 × 90 · 18 × 120 mm | 250 – 1000 mm | Saw-cut | AB |
European oak, finished with plant-based natural oil, in 13 colours. For prices and availability, please contact us.
Guidance
Installation & Care
Before installation
- Store the boxes flat in a dry room and let them acclimatise unopened for at least 48 hours.
- Keep the room at 18–24 °C and 45–60 % relative humidity.
- The subfloor must be dry, clean, level and sound. Check screed moisture before laying.
Installation
- Full-surface bonding with a suitable parquet adhesive is recommended.
- Leave a 10 mm expansion gap at walls and fixed objects and cover it with skirting.
- Factory-oiled boards are ready to use after installation; no sanding or finishing is needed.
Care of oiled floors
- Clean dry with a soft brush, mop or vacuum.
- Damp-clean, never wet, with a soap made for oiled wood floors.
- Use felt pads under furniture and mats at entrances.
- Refresh with maintenance oil when the surface looks dry; repair scratches spot by spot.
Planning a project?
Tell us the area, the pattern and the colour you have in mind. We will send samples, prices and delivery times.